Order direct from our
UK sales team:


Beige Mulch 10kg bag


What is it ?

  • It is a shred from solid rubber tyres that looks like bark
  • Provides a very soft and squashy surface
  • Can be loose or bonded but is most suited for bonding
  • Also known as resin bounded rubber mulch
  • Requires only compacted soil and membrane for sub layer
  • No edging required


How it Works !

  • The coloured mulch arrives in 10kg bags and the resin in 25kg kegs
  • Each square metre of 50mm depth requires 20kg mulch and 4kg resin
  • Mix using a paddle mixer and tub, or a clean concrete mixer
  • The optimum mix of mulch to resin should be about 5:1 ratio


Detailed Laying Method for Bonded Mulch !

  1. Rubber mulch and resin are delivered to site in 10kg bags mulch and 25kg kegs resin. To mix, you can use paddle mixer and tub, a clean concrete mixer or ideally a forced action mixer. It can even mix by hand avoiding contact with your skin. You will also need gloves, trowel, depth block, cloth, funnel, measuring jug, bucket and a porous membrane.
  2. Prepare the ground, flatten the soil as best you can. Lay the membrane over the soil area. Edging can be used otherwise the sides can just sink into a “V” trench at 45 degrees.
  3. Prepare the bonded rubber mulch mix, place 1 x 10kg bag or 2 bags if you are blending colours in the mixer and start turning. Ensure a full measure of binder from the keg goes in a measuring jug. The ratio is 5:1 by weight or 5:1 by volume (1kg = 1.1liters). Add 2kgs of resin to each 10kgs of mulch. Let the rubber and resin mix for 3-5 minutes or until an even consistency is achieved. Pour straight from the tub or via a bucket to the area being worked on.
  4. Use a block of wood to gauge a consistent depth. It can be tampered to the ground usually to 50mm. Do not compact/squash it. A two man experienced team could install in the region of 100sq metres per day.
  5. Caution: ensure that the mulch is dry and stays dry during curing.
  6. If you are leaving an edge to join to the next day, keep it jaggered so that lines are not obvious to the eye.

Disclaimer: This system is designed to be installed for a wide variety of applications, subject to the performance requirements for your particular application and your existing site conditions, the degrees of preparation may vary.

* Hybrid Bonded Mulch

This is a new system being tested and so far shows the same performance as Bonded Mulch whilst saving  over 20% in costs.  For example our tests show a that a 40mm bonded mulch system can perform  exactly the same as a hybrid of 20mm top layer bonded mulch (with 20% resin)  and 20mm base layer 2-6mm rubber crumb (10% resin).

After all, the more expensive coloured bonded mulch can not be seen 20mm down and the resin to hold the rubber together is not as critcal in the base layer as the top layer.

The only downside may that laying may takes 2 days instead of one because the base needs curing firstly.  Also  if the same mixer is being used it will need cleaning out after the laying the 2-6mm crumb SBR base layer. Please enquire for more information.



Hybrid Bonded Mulch Critical Fall Height Chart
 Depth mm  Fall Height  Make Up
 45  1.2m  45mm mulch
 70  2.2m  45mm mulch & 25mm SBR 2-6mm
 130  3.1m  45mm mulch & 25mm SBR 2-6mm




Delivery & Stock Status

Available for next working day delivery! (on all orders placed before 1pm)



Unsuccessful deliveries

In accordance with our conditions of sale, it is important to note that our delivery system requires a hard flat area to receive our product.

If you are in any doubt that we may not be able to deliver please call for advice or watch our video on the delivery page.

Should we be unable to deliver due to the point of off-loading not meeting the criteria, the return charges will apply.

More details are available on the delivery page.