THE UKs FAVOURITE TRADE SHOP FOR ALL DRIVEWAY SUPPLIES

Order direct from our
UK sales team:

Sort results by:

Wet Pour/Soft Play Rubber Granules

EPDM granules topping, SBR crumb base and resin mixes.

  • Manufactured in the UK.
  • High spread rate,i.e. high volume to weight ratio thus cost effective
  • High elasticity.
  • Less filler such as calcium carbonate as with much imported EPDM
  • Full fade resistant colour
  • Quotes and methods provided
  • Installation service available

Wet Pour rubber safety surfacing is suitable for playground installations where impact absorbent surfacing is a requirement up to the appropriate Maximum Free Fall Height (see chart below). It can be used around complex configurations of playground equipment and ground contours.

Wet Pour surfacing for playgrounds is slip-resistant and non-abrasive to young children. It is porous, so no puddles.

Colourful graphics can be created within the Wet Pour rubber surfacing to any attractive theme you may choose in order to enhance and add considerable play value to your playground. Games can also be added such as hopscotch, snakes and ladders, alphabet snakes, etc. Download the Surfacing section of our product book for ideas.

Bases

Our Playground wetpour rubber surfacing system is designed to be laid onto the following sub-bases; –

  1. Up to 12mm stone no-fines concrete or open-textured bitmac
  2. MOT Type 1 stone (surfaces with a thickness of 50mm or more)
  3. Existing tarmac or concrete, subject to being in good condition
  4. Other existing surfaces/bases, subject to preparation in accordance with specific recommendations

Material

Wetpour rubber safety surfacing is recycled bonded rubber, mixed on site using special equipment and laid to exacting standards. The base layer is SBR (Styrene Butadiene Rubber). The top layer is recycled EPDM (Ethylene Propylene Di Monomer). Virgin rubber can be supplied if requested.

×